Verizon SR-F1B - Manual (Page 4)

SPECIFICATIONS
Enclosure
Speaker
Low frequency
High frequency
Rated impedance
Sensitivity
Frequency response
Crossover frequency
Power
handling
Low frequency
High frequency
Input connector
Enclosure material
Weight
Dimensions
Finish
SR-F1B SR-L1B
Bass reflex type
One 30cm(12 " ) dia. cone speaker
CD horn (60° horizontal by 40° Vertical)
plus compression driver
Low frequency : 8
High frequency : 16
Low frequency : 98dB(1W/1m)
High frequency : 110dB(1 W/1m)
70 Hz~20 kHz at AC-F1 's use
1 kHz at AC-F1's use
Continuous pink noise : 120 W RMS ( 1 )
Continuous program : 360 W
Continuous pink noise : 80 W RMS ( 2)
Continuous program : 240 W
Two 38cm (15 ") dia. cone speakers
—
8 X2
96dB(0.5Wx2/1m)
35 Hz~1 kHz
125 Hz at AC-L1's use
Continuous pink noise : 150 W RMS x 2( 3)
Continuous program : 450 W RMS x 2
—
Neutric NL4MPR
Apiton plywood (Thickness : 18 mm or 0.71 * )
Approx. 37 kg (82 Ib.)
390 (W) X 619 (H) X 364 (D) mm
15.4(W) x 24.4(H) X 14.3(D) in.
Approx. 79 kg (174 Ib.)
829 (W) x 629 (H) x 606 (D) mm
32.6(W) x 24.8(H) x 23.9(D) in.
Enclosure : FRP coating in gray color
Front grille : Black (painted)
Specifications are subject to change without notice.
Standard Accessories: Operating instructions x 1
Mounting instructions x 1
( 1) Band Limited (50 to 1,000Hz) Pink Noise Signal (24 hours)
( 2) Band Limited (1,000 to 20,000Hz) Pink Noise Signal (24 hours)
( 3) Band Limited (40 to 1 ,000Hz) Pink Noise Signal (24 hours)
CHARACTERISTIC DIAGRAMS (1/3 octave pink noise)
SR-F1B (at AC-F1 electronic control unit's use)
Frequency response (1W/1m, at 300Hz)
Polar response (1W/4m)
Horizontal
Vertical
SR-L1B (at AC-L1 electronic control unit's use)
Frequency response (1W/1m, at 100Hz of crossover OUT)
General frequency response (1W/1m, at 300Hz of the SR-F1B)
SR-L1B+AC-L1, SR-F1B+AC-F1 AC-L1: Crossover OUT
Printed in Japan
133-01-381-60
TOA Corporation
AC-L1 mode
Crossover OUT
Crossover IN