VTech Nitro Jams Notebook - Manual (Page 5)

3
AC-DC ADAPTOR
Use a VTech ® adaptor or any other standard adaptor that complies with EN61558 AC-DC
9V 300 mA center-positive.
CONNECTING THE ADAPTOR
1. Make sure the unit is turned OFF .
2. Locate the adaptor jack on the back of the unit.
3. Insert the adaptor plug into the unit’s adaptor jack.
4. Plug the adaptor into an electrical outlet.
5. Turn the unit ON .
NOTE : When the toy is not going to be in use for an extended period of time, unplug the
adaptor.
STANDARD FOR TOYS WITH ADAPTORS
• The toy is not intended for use by children under 3 years old.
• Use only the recommended adaptor with the toy.
• The adaptor is not a toy.
• Never clean a plugged-in toy with liquid.
• Never use more than 1 adaptor.
• Do not leave the toy plugged in for extended periods of time.
NOTICE TO PARENTS
Regularly examine the adaptor, checking for damage to the cord, plug, transformer or other
parts. Do not use the adaptor if there is any damage to it.
The demo tag should be removed automatically when the product is taken out of the packing.
If the demo tag is still in position when you begin play, please remove it from the bottom of
the unit to activate normal play mode.
REAL MOUSE
Use the mouse only on a clean, flat
surface, so that the roller is not damaged
and the cursor moves freely across the
screen. Only use a mouse that is
compatible with
VTech ® products.
CONNECTING THE MOUSE
1. Make sure the unit is turned OFF .
2. Locate the mouse jack on the back of
the unit.
3. Plug the mouse into the mouse jack.
G
E
T
T
IN
G S
T
ARTE
D