ViewEra V180T Series - Manual (Page 6)

 Power and extension cords
 Do not allow anything to rest on the power cord.
 Do not locate this product where persons will walk on the cord.
 Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has
UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with
ground conductor power cord that meets the respective European country’
s safety regulations, such as VDE for Germany.
 Do not over load wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed
10 amperes.
 Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’ s rating.
 If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall outlet, Use an
UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz, 1.0A (minimum) only.
 Environment
 Place the monitor on a flat and leveled surface.
 Place the monitor in a well-ventilated place.
 Keep the monitor away from：
 Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong
magnetic fields.
 Please adjust the frequency to 75 Hz after setting up the LCD monitor.
 Then push the OSD menu button and use the Auto Adjust function to find the best mode of your computer.
Page 4