VOSONIC GV6200 - Manual (Page 10)

The motion detection feature is used to generate an alarm whenever
movement occurs in the image.
1. Adjust Parameter (see table below for details).
Parameter Object Size History Sensitivity
H : High continuous-loop recording ensures that no critical shot is ever missed
* The counter will not count up in this mode.
M: Middle Very small objects
trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a long
period.
Ordinary colored
objects against
ordinary backgrounds
will trigger the motion
detection
L : Low Only very large
objects trigger motion
detection
An object that appears in
the region will trigger the
motion detection for a very
short period.
Only very bright
objects against a dark
background will trigger
motion detection
2. Plug the GV6200 power adapter into a working electrical outlet.
Aim the motion detector at the field of view you want covered.
3. Insert the SD card into the SD card slot.
NOTE: Please carefully insert the memory card with the front of the card
facing the LED. .
4.The LED on the back side will show Fo: or Fo-- ; it is asking
“Do you want to format the SD card ? “
You can press [Enter] to format the card or [ Loop] to enable the
recording.
5. While the parameter is set at M or L , counter will track the number of
video files when the device detects any movement occur.
Note: The unit will automatically being to record when it has
been idle for 10 seconds.
5.How to configure Motion Detection: