Edit a number/name stored in the directory, Delete a number/name stored in the directory, Basic operation – VTech ia5829 User Manual

Page 20: Telephone directory

Advertising

Basic Operation

first ring. Choose N for a normal ringing pattern.

8. Press

SELECT

or PROG to confirm your selection. If you chose Y, a

will be

displayed with the directory entry.

NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds,
and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through the entries stored in the directory.

-OR-
Press the dial pad key for the first letter of the entry you want to edit.

3. When the screen displays the entry you want to edit, press SELECT. Then press

or until EDIT flashes.

4. Press SELECT. The screen displays the name and number. The cursor ap-

pears at the end of the name. Use , and the dial pad keys to edit the
name. Press SELECT to move on to edit the number. Use to backspace
and make corrections. Press SELECT to move on to edit the distinctive ring
setting.

5. Press SELECT to save the edited information.

Delete a Number/Name Stored in the Directory
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries in the directory.

-OR-
Press the dial pad key for the first letter of the entry you want to delete.

3. When the screen displays the entry you want to delete, press SELECT. Then press

or until ERASE flashes.

4. Press SELECT. The screen displays ERASE NO YES

and the number. The current

choice flashes.

5. Press or until YES flashes.
6. Press

SELECT

. You’ll hear a confirmation beep.

Telephone Directory

SPEED EDIT ERASE

SPEED EDIT ERASE
8 0 0 5 9 5 9 5 1 1

8 0 0 5 9 5 9 5 1 1

SPEED EDIT ERASE

SPEED EDIT ERASE
8 0 0 5 9 5 9 5 1 1

8 0 0 5 9 5 9 5 1 1

Advertising