Vision Fitness ES600 - Manual (Page 18)

14
ES600
MOVING THE ES600
Make sure the quick release levers for the handlebar are tight. Stand in
front of the bike, grasping the end of the handlebars. Place one foot on
the bikes front support foot to stabilize the bike and begin tilting the bike
toward you. The transport wheels should now be in contact with the
ground and can easily roll in any direction. Be careful when moving the
bike to prevent a sudden impact that could harm the bike or its
surroundings.
LEVELING THE ES600
The ES600 should operate on a
level surface with no lateral
movement. There are height
adjuster caps located on the
bottom side of the front foot and
rear foot. Turn these caps
clockwise or counter-clockwise
until the bike is stable.
ES60
0
ES60
0
INDO OR CY CLE