Victorinox CHRONOGRAPHS Watch - Manual (Page 23)

- 22 -
REINITIALIZING THE CHRONOGRAPH HANDS (SUB-DIALS)
Following a battery change, an incorrect actuation, violent impact
or exposure to a strong magnetic field, one of the chronograph counter
hands may fail to revert to the original position (0). To reinitialize
the hands, proceed as follows:
CHRONO TYPE I
Zero Reset of the Minutes Counter Hand
A. Pull out the crown to position (3).
B. Press Pusher A briefly until the hand reverts to the original position.
Zero Reset of the Seconds Counter Hand
A. Pull out the crown to position (2).
B. Press Pusher B briefly until the hand reverts to the original position.
Zero Reset of the Tenths of a Second Counter Hand
A. Pull out the crown to position (2).
B. Press Pusher A briefly until the hand reverts to the original position.