VTech VT 9162 - Manual (Page 19)

19
AD
V
ANCED OPERA
TION
OPTIONAL HEADSET INSTALLATION & OPERATING INSTRUCTIONS
Your VT 9162 cordless telephone is equipped with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free operation.
If you choose to use the Headset option, you must do the
following:
INSTALLATION
* Obtain an optional accessory Head set, which is compat-
ible with the
VT 9162.
Please contact VTECH Communications Customer Ser-
vice, in the U.S. toll-free at 1-800-595-9511, in Canada
call 1-800-267-7377 for dealer information in your local
area. You can also purchase a compatible Headset di-
rectly from VTECH Communications Customer Service.
* Once you have a compatible 2.5mm Headset, locate the
Headset Jack on the Handset of your
VT 9162. Connect
the plug on the Headset to the jack on the cordless Hand-
set. The plug should fit securely. Do not force the con-
nection. See illustration.
OPERATION
NOTE: Whenever a compatible Headset is connected to the cordless Handset, the microphone
on the Handset will be MUTED. This is done to limit the effect of background noise.
* Many compatible Headsets have a monaural design which is reversible, so you can wear your
Headset on either the left or right ear, leaving one ear free for room conversation.
BELT CLIP
* The VT 9162 is also equipped with a detachable belt clip.
Align the pins on the inside edge of the belt clip with the
notches on the side of the
VT 9162 Handset. The belt
clip should snap securely into place. Do not force the
connection. See Illustration.