Vantec MRK-103F - Manual (Page 2)

1-2. Pull the handle outwards to remove the carrier body away from the cartridge frame. (Fig.2)
Step 2
2-1. Push the release latch to slide the top cover backwards and remove. (Fig.3)
PUSH
Step 3
3-1. Insert the DC power cable and IDE cable on the HDD. (Fig.4)
3-2. Position the HDD into carrier body and secure the HDD using the four 6#-32 screws provided.
(Fig.5)
Step 4
4-1. Slide the top cover back to the carrier body by sliding forward to secure. (Fig.6)
Fig. 2
Fig. 5
Copyright 2002 Vantec Thermal Technologies, INC.
All Rights Reserved
http://www.vantecusa.com
Fig. 3
Fig. 4
Fig. 6
Model MRK-103F