Vantec SATA/IDE to USB 2.0 Adapter None - Manual (Page 8)

6
Installing the SATA/IDE-USB Adapter for internal use with 2.5”/3.5” SATA Hard Drive:
1. Open computer case.
2. Insert drive and mount with screws.
3. Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to
the SATA connector on the hard drive hard drive.
4. Connect either a 4-pin power connector or SATA power connector
from power supply to hard drive. Do not connect both. (Do not need to
use supplied power adapter for internal use)
5. Connect USB connector of SATA/IDE-USB Adapter to an available internal
or external USB port.
6. Close computer case.
2.5” SATA HDD 3.5” SATA HDD