Pre l iminar y – Vidikron VP-6000a User Manual

Page 16

Advertising
background image

Controls and Functions

6

Vidikron PlasmaView Owner’s Operating Manual

PRE

L

IMINAR

Y

1.

DISPLAY STAND

Optional accessory for tabletop installations.

2.

REMOTE CONTROL SENSOR

Receives the signals from the remote control.

3.

STANDBY/ON INDICATOR

- Lights green to indicate normal operation;

- Flashes green (once per second) when the AUTO OFF feature is active.

- Lights red to indicate that the PlasmaView is in standby mode;

- Flashes green or red (twice per second) to indicate an error condition.

4.

HANDLES (at the rear of the panel)

ALWAYS use the handles when carrying the unit.

5.

STANDBY/ON BUTTON (

)

Press to put the display into operation or standby mode.

6.

MENU

Press this button to show or hide the On-Screen Display (OSD) controls.

7.

INFO/SET

When the OSD controls are visible on-screen, press this button to select an OSD
sub-menu or confirm a changed setting.


When no OSD appears on-screen, press this button to display the currently-selected
input, aspect ratio and input signal characteristics (resolution, timing etc.).

8.

INPUT/UP (

)

Press this button to switch inputs or move the cursor up in the current OSD menu.

9.

ASPECT RATIO/DOWN (

)

Press this button to change the aspect ratio (screen size) or move the cursor down in the
current OSD menu.

10. LEFT (

) / VOL – and RIGHT (

) / VOL +

These decrease or increase the volume of sound from the speakers, or move the cursor
left or right in the OSD mode.

Advertising
This manual is related to the following products: