Volvo FM 84R B3 CR - Manual

1174
TP
D 1370
TWB
C
B
1995
796 1377 2495
2977
A
4171
v v
v
v
FM 360 - 480 8x4 High Tipper
B Ride Suspension - Euro 4/5
Chassis Weights kg 2)
Turning Diameter mm
1) Chassis Dimensions
Cab Height: +96mm for sleeper cab L2H1, +533mm for Globetrotter L2H2.
Front axle to back of cab intake: +434mm for sleeper and Globetrotter cab.
Height can vary ± 20 mm for leaf suspension.
All dimensions are for unladen chassis.
Rear overhang used for vehicle weight calculation is the maximum rear overhang
(D Max) for selected wheelbase.
Weights and dimensions are based upon the following tyres -
Front:
12R22.5
Rear: 12R22.5
2) Chassis Weights
Chassis weight includes oil, water, 70 litres fuel, without Adblue and without
driver. Weights can vary ± 2% and vary depending on options chosen.
3) Plated Weights
To obtain 8000kg front axles 315/80R22.5 tyres must be specified.
For more detailed weight information, including optional equipment weights, ask
your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding.
Refer to Volvo Bodybuilder Instructions and chassis drawings
http://vbi.truck.volvo.com
Important Notes
A Wheelbase ..................................................................................................................... 5100 5600
TWB Theoretical wheelbase .................................................................................................. 4788 5288
B Centre of rear axle to back of cab ................................................................................ 4274 4774
C Overall Chassis Length ................................................................................................. 8562 9062
D Min Rear Overhang (Min) ..................................................................................................... 715 715
D Max Rear Overhang (Max) ................................................................................................... 715 715
TP Tipper hinge position ..................................................................................................... 615 615
Largest possible fuel tank RHS with frame mounted catalyst (litres) ...................................... 415 545
Plated Weights kg 3) Plated Design
Model Code FM 84R B3 CR
Turning Circle Diameter Kerb to Kerb ........................................................................................ 20500 22100
Turnng Circle Diameter Wall to Wall .......................................................................................... 22100 23700
Front Axle ................................................................................................................................... 6700 6720
Rear Bogie .................................................................................................................................. 3040 3050
Kerb Weight ................................................................................................................................ 9740 9770
Gross Vehicle Weight 32000 37000
Gross Combination Weight 35500 40500
Front Axle 1 7100 8000
Front Axle 2 7100 8000
Drive Axle 1 9500 10500
Drive Axle 2 9500 10500
Chassis Dimensions mm 1) Tipper
Chassis mounted
catalyst with
vertical tailpipe