Viking VGQT240 - Manual (Page 3)

P L A N N I N G A N D D E S I G N G U I D E
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1
R E L E A S E D 1 2 / 1 / 0 7
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
COOKING
Professional Built-In Gas 24”W. Rangetop
18” min.
(45.7 cm)
42”min.*
(106.7 cm)
24”min.
(60.9
cm)
36”
(91.4 cm)
7-1/2”
(19.2 cm)
13”max.
(33.0 cm)
A
A
VGWT 6” (15.2 cm)
VGGT 6” (15.2 cm)
VGQT 9” (22.9 cm)
Minimum clearances from adjacent
combustible construction
• Cooking surface and below, i.e., 36”
(91.4 cm) and below
o Sides—0”
o Rear
• 0” with backguard or high-shelf
• 0” with island trim and non-
combustible rear wall
• 6” (15.2 cm) with island trim and
combustible rear wall
o Top grate support—3/8” (1.0 cm)
above countertop
• Above cooking surface, i.e., above 36”
(91.4 cm)
o Sides
o VGWT/VGGT—6” (15.2 cm)
o VGQT—9” (22.9 cm)
o Within the side clearance, wall
cabinets no deeper than 13” (33.0
cm) must be minimum 18” (45.7 cm)
above cooking surface.
• Wall cabinets directly above product
must be minimum 42” (106.7 cm)
* This minimum height requirement does
not apply if a rangehood is installed
over the cooking surface.
Do not install two or more units
side-by-side.
Dimensions & Specifications
CLEARANCE DIMENSIONS