Victor GZ-MC100 - Manual (Page 23)

BASIC OPERATIONS
EN
23
BASIC OPERA
TIONS
1
Set the power switch to while pressing down the
lock button located on the switch.
2
Press MODE to select .
● A still image is displayed.
● To switch the medium to be played back, see pages 26 and
27.
3
Press 3 to display the previous file. Press 5 to
display the next file.
How to use INFO button
Press INFO repeatedly. You can display the file
information or remove the on-screen display.
NOTES:
● Images shot and stored on the recording media with another
device may not be played back correctly.
● You can zoom in/out or rotate still images. For details, read
the advanced operation manual. ( ੬ pg. 32)
You can playback all the images stored in recording media
automatically.
1
Perform steps 1 – 2 in the left column.
2
Press 49 to start the slide show.
● If you press t during the slide show, files are displayed
in descending order.
● If you press r during the slide show, files are displayed
in ascending order.
● To end the slide show, press 49 again.
Deleting Still Image Files
Press , then press rt to select [EXECUTE] and press
49.
● You can select the desired file to be deleted by pressing w
e.
● To delete multiple files at once, see pages 26 and 29.
Still Image Playback
Power Switch
Lock Button
MODE
3
5
49
Zoom Lever
INFO
Slide Show
To display the next
image To display the
previous image
Slide Show
Normal Playback