Remote control – VIEWSONIC CD5233 User Manual
Page 14
ViewSonic
12 CD5233
Remote Control
POWER button
To turn the power on/off.
If LED Power Indicator on the monitor is not lightening, then the
remote control will not work.
PICTURE MODE button
To select picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA].
HIGHBRIGHT
: for moving image such as Video
STANDARD:
for images (Factory setting)
sRGB:
for text based images
CINEMA:
for movies.
MONTION button
To expanded image slightly and moves 4 directions
(up,down,right,left) periodically
PIP (Picture In Picture) button
ON/OFF button:
To turn
PIP mode ON/OFF.
SOURCE button:
To select the input signal for the sub-picture.
SWEP button:
To exchange between the main picture and sub-
picture.
Note:
The “PIP” and “POP” modes do not work if the screen size is
“CUSTOM” , “DYNAMIC” or “REAL”.
ENTER button
To activate the setting with OSD menu.
LEFT button
To
decrease the adjustment with OSD menu.
To move the sub-picture left when in “PIP” mode.
MENU button
To turn the OSD menu on/off.
DOWN button
To move the highlight bar down to adjust the selected item when
OSD menu is on.
To move the sub-picture down when in “PIP” mode.
INFO. button
To turn on/off the setting information displayed on the right-up
corner of the screen
.
SIZE button
To select the picture size from [FULL], [NORMAL], [CUSTOM] ,
[DYNAM IC] and [REAL].
VOLUME button
VOL
＋
button:
To increase the audio output level.
VOL
－
button；
To decrease the audio output level
VIDEO SOURCE button
To activate input selection menu, and push “” or “” to select
input source from [HDMI], [DVI-D], [VGA],[COMPONENT],
[S-VIDEO] and [VIDEO], and then push “ENTER” to switch to
selected input source.
AUDIO SOURCE button
To activate audio selection menu, and push “” or “” to select
audio source from
[AUDIO1], [AUDIO2], [AUDIO3] and [HDMI], and
then push “ENTER” to switch to selected audio source.
BRIGHTNESS button
To start the BRIGHTNESS OSD selection, and then push "
▶
" or "
◀
"
button to adjust the value.
UP button
To move the highlight bar up to adjust the selected item when OSD
menu is on.
To move the sub-picture up when in “PIP” mode.
RIGHT button
To increase the adjustment with OSD menu.
To move the sub-picture right when in “PIP” mode.
EXIT button
To turn to the previous OSD menu.
AUTO SETUP button
To execute the AUTO ADJUST function.
MUTE button
To turn the mute function on/off.