Verbatim Store 'n' Play VM-01 - Manual (Page 16)


Shutting downÖ
An Introduction to Basic Functions
Power on/off
Power on
Press “play/pause” button to start the device
Start figure
The following picture (figure) has been set in the device before it left factory.
Power off
1. Long press “play” button, the device will be shut down, as the progress bar
displayed below.
2. When the progress bar is full, the device will be shut down automatically.
3. If releasing the “play” button before the progress bar is full, the device will
resume to the former status. Designed in this way, the device will not be shut
down accidentally.