Visioneer XP 450 - Manual (Page 38)

S ELECTING N EW S CAN S ETTINGS FOR THE S CAN B UTTON 33
S
ELECTING
N
EW
S
CAN
S
ETTINGS FOR THE
S
CAN
B
UTTON
The scan settings for the Scan button consist of a Destination
Application, a Scan Configuration, and a Document Format. The
OneTouch Properties window is where you select these three elements
for the Scan button.
To select new settings:
1. Open the OneTouch Properties window. See “The OneTouch
Properties Window” on page 29 for the steps to open the window.
The OneTouch Properties window shows the current settings, and
is where you select new settings.
2. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See “Selecting Options for the Scan Button” on page 48 to display a
full list of the Destination Applications that you can use with the
scanner.
Select a software application
from the list as the Destination
Application to send scanned
documents.
Select a format for
the scanned image.
Select a configuration
for scanning the item.