Starting your camera, Camera mode, Taking photos – Vivitar ViviCam 5018 User Manual
Page 9
8
3.
If there are photos and videos in the internal memory when you insert the card into your camera,
“copy
SDRAM file to your card, please wait
…” will appear on the screen. The media will now be copied to your
card.
4.
When you take out the SD memory card,
“Card removed, change to Internal RAM” will appear on the LCD
screen. With no card in the camera you will now only be able to take one test photo or 10 seconds of
video.
Starting Your Camera
Press and hold the Power button to turn on your camera. The LCD screen will light up indicating that your
camera is on and ready for use.
To power off your camera, press and hold the Power button again for about 3 seconds.
Camera Mode
1.
Press the Menu button.
2.
Press the Up/Down button and select Mode.
3.
Press the Shutter button.
4.
Press the Up/Down button and select SINGLE
5.
Press the Shutter button again to confirm. You are now in default camera mode.
Taking photos