Configuration, Overview, Login – VBrick Systems MPEG-1 User Manual
Page 13: Chapter 2
STB Admin Guide
7
Chapter 2
Configuration
Overview
The STB configuration application is used to change the default settings for the STB. Once
the IP address is obtained through the Command Prompt interface (see Setting the IP
Address on page 4), you can access the set top box by typing the IP address into the Address
field of a web browser, such as Internet Explorer. When the first page is displayed, select
Log in
from the navigation bar at the top of the page.
Topics in this chapter
Login
T
To login to the set top box:
1. Enter the IP address of the STB in a browser and click
Log in
when the first page is
displayed.
2. Enter the
User name
and
Password
and click
Start
. This displays the
Administration
window. This window is used to access all system parameters. Most commands described
in this document are accessed via the
Configuration
button.
User name
Default User name:
root
. Lower case, case sensitive.
Password
Default Password:
admin
. Lower case, case sensitive.