VTech VT2625 - Manual (Page 20)

19
Ringer Volume
• From the idle (OFF) mode, press SEL
then
or key to RINGER
VOLUME.
• Press SEL again. The current ringer
volume will be shown:
• Press or keys or enter digit 0-
6 to the desired ringer volume. The
current ring tone is played and the
volume bar is increased/decreased
each time the setting is adjusted. At
the lowest setting, the Handset will
not ring when a call comes in and the
display will show:
• Press SEL to confirm the setting.
Ringer Tone
• From the idle (OFF) mode, press SEL
then
or key to RINGER TONE.
• Press SEL then you are prompted to
choose INTERCOM CALL or
OUTSIDE CALL. Press
or
keys to select the desired option.
• Press SEL again. You can then use
or keys or enter digit 0-9 to
sampling the ring tone. The screen,
for example, will show:
• Press SEL to confirm your setting.
Key Tone (preset to ON)
• From the idle (OFF) mode, press SEL
then
or key to KEY TONE.
Handset Settings
>RINGER VOLUME
RINGER TONE
RINGER VOLUME
RINGER VOLUME
RINGER TONE
KEY TONE
>INTERCOM CALL
OUTSIDE CALL
> KEY TONE
HANDSET NAME
Basic Operation
>INTERCOM TONE
1