VIEWSONIC N3250w - Manual (Page 28)

E
N
G
L
I
S
H
Basic Operation
Turning on the LCD TV
To operate the function of your LCD TV, you can use your remote control or
those buttons above your LCD TV to set input source, change channels, or
adjust volume.
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the
LCD TV will not be used for a long period of time, please turn it off)
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your
remote control to turn on/off the TV. The power LED indicator lights up when the
LCD TV is on.
Select input source
To select the required input sources. Use to move the cursor bar, and select
by pressing Enter.
VOLUME Adjusting
Press or VOL-/+ to adjust the volume.
To silence the volume, press MUTE.
If you want to restore volume, press MUTE again, or press directly.
Channel Select
Press number key, CH-/+ key or button to select your desired channel.
If your desired channel is below 100, directly press number key. If your desired
channel is over 100, press 100 key first, and then press the other two number
keys.
Ex: Your desired number is 8.
Press 0 press 8 or press 8 only.
Ex: Your desired number is 110.
Press 100 press 1 press 0.
Retnrn to last channel, press RECALL.
ViewSonic N3250w 27
VOLUME 20