VXI Bluetooth Heasdset BlueParrott B10 - Manual (Page 12)

12
PAIRING
See page 5 for location of button controls.
You must pair the headset with your Bluetooth device before first use.
Before Pairing: Turn the Headset Off
If the yellow light on the headset is flashing (you may need to wait 5 seconds to see
it), then you must turn the headset off before pairing, as follows:
Press and hold down the multifunction button on the headset for about 3 seconds.
You will hear 3 beeps in the headset that descend in tone (hold it up to your ear)
and the yellow light on the headset will stop flashing. The headset is now off.
Check your other Bluetooth device’s pairing instructions for information about pair-
ing preparation for those products.
Pair the Headset With Another Bluetooth Device
Examples: Bluetooth cellular phone, Bluetooth computer, computer Bluetooth adapter,
Bluetooth PDA, etc., For pairing with a VXI BlueParrott base see page 13.
S ee compatibility section of this User Guide (page 6). Be sure the headset is out of
the charger or base and turned off.
IMPORTANT: Consult your other Bluetooth device’s user guide (or the manufacturer)
for information about the device’s pairing procedure. VXI cannot provide technical
assistance for other manufacturer’s products.
1. Turn off all other Bluetooth products or keep them at least 50 feet away.
2. Position the headset and your other Bluetooth device no more than 3 feet apart.
3. Press and hold down the headset’s multifunction button for about 5-10 seconds.