Vantec Dual Bay External HDD Enclosure NexStar MX - Manual (Page 18)

( Figure 7-N )
Creating a New Partition / Formatting The Hard Drive
16
RAID 0 Mode :
Raid 0 Mode can integrate two different
brands of hard drives with different capacity
to a larger format hard drive.
>
Two hard drives of the same capacity: the total
capacity is the sum of the two hard drives.
>Two hard drives of the different capacity: the
total capacity is the twice volume of the smaller
hard drive.
( Figure 7-N )
STEP3: Click “Erase” at the upper right side. Select
which kind of format from Volume Format.
Please input the name you wish to name your
new Volume. Click “Erase” at lower right side.
( Figure 7-O )
( Figure 7-P )
STEP4: After you hit "Enter", the dialog "Erase Disk"
will appear. Please click "Erase" to begin
formatting your hard drive. ( Figure 7-P )
( Figure 7-O )
Select how you want to use your new Volume.
Click “Cancel”, if you want to use default settings.
( Figure 7-O )
( Figure 7-O )
WARNING :
All data will be erased after the format