VocoPro CDG-9000 - Manual (Page 9)

9
Descriptions and functions
CD/CDG Player Unit
1. POWER
When the POWER button is pressed, the power turns on. Pressing the POWER button while the unit is
on will turn the unit off.
2. DISC TRAY
Place the discs in the tray. Press the OPEN/CLOSE button to open and close the disc tray.
3. OPEN/CLOSE
Press to open and close the disc tray. The controller unit also includes an OPEN/CLOSE button. The disc
tray cannot be opened during playback, so stop playback before pressing the button.
4. VIDEO OUT JACKS
This jack outputs the CDG video signal to display graphics via your TV or monitor using RCA style video
cables
5. AUDIO OUT 1 and 2
The audio signals from each player are output from these jacks using standard RCA left and right cables.
6. SWITCHED VIDEO OUT
The VIDEO signal is switched automatically between DECK1 & DECK2 from this output.
7. SWITCHED AUDIO OUT
The AUDIO signal is switched automatically between DECK1 & DECK2 from this output.
8. REMOTE CONTROLLER JACK
Connect the Control Cord from the Controller unit REMOTE CONTROLLER JACK.
9. AC INPUT - Connect the AC Power cord here and plug the other end into an electrical outlet.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LAVERNE,CALIFORNIAU.S.A.
www.vocopro.com
NTSC FOR U.S. TV SYSTEMS
PAL FOR EUROPEAN TV SYSTEMS
NTSC FOR U.S. TV SYSTEMS
PAL FOR EUROPEAN TV SYSTEMS
VIDEO SYSTEM
NTSC PAL
VIDEO SYSTEM
NTSC PAL DECK
1
DECK
2
VIDEO OUT
AUDIO OUT
R L
VIDEO OUT
AUDIO OUT
R L
R L VIDEO
SWITCHED
OUT DECK
1&2
CONNECT TO
REMOTE CONTROLLER
115V 230V
AC INPUT
4
7
5
6
9
1
2 3