E:4:01 – Varimixer W80 User Manual
Page 14
E:4:01
The values in program 26 steps 7, 8 and 9 are missing or incorrect.
To correct this error:
Push
“HOLD FOR 3 SECONDS”
Push
Push “26”
Push “1 2 3 4”
Push
Push
until you reach Step 7.
Enter the value on the following chart that matches the mixer model. Repeat for step 8 and 9.
Step 7
Mixer Model
W30
W40
W60
W80
W100
W150
Cinnabon 40
Cinnabon 60
Value
30
40
60
80
100
150
401
601
“SPEED MODE” :02
(Speeds 1-4)
“RPM” MODE :00
(Speeds RPM)
Step 8
Mixer Model
W30
W40
W60
W80
W100
W150
Krispy Kreme
Cinnabon 40
Cinnabon 60
Value
369
375
390
422
422
422
425
737
660
Step 9
Mode
Value
OR
Push
Push
OVERLOAD light: When activated, mixer will lower speed 20% until it can maintain a steady speed.
1. Too much dough in the bowl (overloading) or speed set to high. Lower dough amount and speed.
2. V-belts slipping , tighten belts or replace as needed.
3. Drive pin in motor pulley sheared, replace.
4. Hall effect sensor out of adjustment or magnet disc loose. (See E:301)
12