VIEWSONIC N3290W User Manual
Page 16
Getting Started
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
9
N3290w
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing
the product to the wall, please consider the following guidelines:
z
Read the Important Safety Instructions, at the start of this manual.
z
Do
not install in a moist or wet environment. This equipment is intended for
indoor use.
z
Do
not install near heat source, or strong magnetic fields
z
Use only ViewSonic approved wall-mounting brackets to support the LCD TV
weight
z
Before attaching the wall mount plate to the back cover, ensure the product is
working
z
If your LCD TV is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
z
Disconnect the power and any other cables that might hinder moving the LCD TV.
z
Set the LCD TV on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while
installing plate.
z
Through the matching screw holes in the bracket, there are 4 screws mounted on
the backside of the LCD TV. Loosen all 4 screws, and keep for future use.
z
Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may
damage the power supply causing the unit to fail. The wall-mount screw type is
M6 x L10.
z
Mount the wall mount bracket to the wall ensuring use of proper screws to
support the installation. Ensure there is at least 6cm of space surrounding any
air-vents of your LCD TV to allow adequate cooling during operation.
z
Hang the LCD TV wall mount plate to the wall mount bracket, completing
installation. Enjoy your ViewSonic LCD TV