Vacuflo FC1550 - Manual (Page 4)

Connect To A Properly Grounded Outlet Only.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should
malfunction or break down, grounding provides
a path of least resistance for electric current to
reduce the risk of electric shock. This appliance
is equipped with a cord having an equipment
grounding conductor and grounding plug. The plug
must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or service person
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided
with the appliance - if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
Models FC300, FC550 & FC650 are for use on a
nominal 120 volt circuit and has a grounding plug
that looks like the plug in Fig. A .
Model FC1550 Dual Motor unit is for use on a
nominal 240 volt circuit and has a grounding plug
that looks like the plug illustrated in Fig. B.
Make sure that the appliance is connected to an
outlet having the same configuration as the plug.
No adapter should be used with this appliance.
Save These Safety Instructions
Intended For Household and Light Commercial Use.
Do not vent into a wall, a ceiling, or concealed space of a building or structure.
Warning:
Electric shock could occur if used on wet surfaces.
Caution:
Do not use on wet rug or floor.
MODELS: FC300, FC550, FC650 & FC1550 • VACUFLO ® Filtered Cyclonic ™
Figure A
Grounding Method: FC300, FC550, FC650
Figure B
Grounding Method: FC1550
Ground