VDO Cytec C05+ - Manual (Page 17)

6. Resetting information to zero
The following information may be reset to zero with your VDO CYTEC C05+:
DST = trip distance
ATM = trip counter
Watch out: Both these information are simultaneously reset to zero
To reset either DST or ATM, one of these informations has to be displayed.
Resetting to zero is done by pressing the MODE button for five seconds straight.
Watch out: When you have ODO or CLK in display and you press the MODE button for
five seconds you are entering the wheelsize set-up mode or the clock set-up
mode. Make sure you have either DST or ATM in display before pressing the
MODE button for five seconds.
7. Stand-by-mode
Your computer VDO CYTEC C05+ features a stand-by-mode in order to save battery power. Your computer
changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been
pressed in the same period of time. The time of day (CLK) is still displayed in stand-by-mode, though.
By pressing any button or just continuing your ride, this will end stand-by-mode and
return you to the appropriate mode.
GB
16
6. Resetting information to zero
The following information may be reset to zero with your VDO CYTEC C05+:
DST = trip distance
ATM = trip counter
Watch out: Both these information are simultaneously reset to zero
To reset either DST or ATM, one of these informations has to be displayed.
Resetting to zero is done by pressing the MODE button for five seconds straight.
Watch out: When you have ODO or CLK in display and you press the MODE button for
five seconds you are entering the wheelsize set-up mode or the clock set-up
mode. Make sure you have either DST or ATM in display before pressing the
MODE button for five seconds.
7. Stand-by-mode
Your computer VDO CYTEC C05+ features a stand-by-mode in order to save battery power. Your computer
changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been
pressed in the same period of time. The time of day (CLK) is still displayed in stand-by-mode, though.
By pressing any button or just continuing your ride, this will end stand-by-mode and
return you to the appropriate mode.