Vestax PCV-150 - Manual (Page 9)

Driver
Top panel
8
HOW TO CHANGE THE FADER UNIT
Driver
Top panel
Crossfader
panel
HOW TO REMOVE THE CROSSFADER PANEL
1 Remove crossfader knob and 2screws which fix
the crossfader panel.
2 Remove the crossfader panel.
HOW TO CHANGE THE FADER UNIT
1 Remove the screws on the fader panel.
2 Remove the fader unit from position in mixer.
3 Carefully remove the multi-cable connector
from fader unit.
4 Attach multi-cable connector to new fader unit.
5 Position the fader unit carefully and secure with
screws.
PMC CONNECTOR
Set switch to "PMC" position
CF-PCV For
PMC SERIES
( PMC05ProII, PMC06ProA, etc) Insert the
multi-cable connector
Set switch to "PCV" position.
Note
Use a plus driver fitting screw.
Caution: When you change any parts, do not
loose the screws with marking.