Vivitar Digital Binocular Camera VIV-CV-1225V - Manual (Page 16)

15
AUTO POWER OFF
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. When the
camera sits idle for three minutes, the camera will shut off completely and will need to be
powered on again with the power button before the next use.
1) Press the MENU button to enter the Menu Mode options.
2) Press the RIGHT button to enter the General Menu of camera settings mode.
3) Press the LEFT button to return to the change of camera mode settings menu.
4) Press the NEXT button to select the Auto Power Off icon that appears on the screen
menu.
5) Press the OK button to determine the Auto Power Off option. The following Auto Power Off
options are displayed on the LCD screen:
Disable the Auto Power Off
Activate the Auto Power Off
6) Press the NEXT button to highlight the various Auto Power Off options, and select the
option you want.
7) Press the OK button to select your option and save your choice.
8) Press the MENU button to exit and return to the camera standby mode.
FREQUENCY
The options in the Frequency menu represent the frequency of the electrical current in
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not
match your country‟s electric current, you may see waves on the images taken by your camera.
You can set on the optical frequency of camera according to your area (usually 60HZ for the
United States, and 50HZ for Europe).