Grill operation, Griddle/simmer plate operation – Viking F1737H User Manual

Page 7

Advertising
background image

13

Grill Operation

•Turn on ventilator (separate product).
•Turn control knob to HI.
•Preheat on HI for 5 to 10 minutes.
•Place food on grill, cook as desired.

Grill Cooking Tips
•When grilling chicken, roasts, well done steaks or chops and thick

pieces of meat, sear on HI. Then, reduce the heat setting to prevent
excessive flare-up. This will allow the food to cook through without
burning the outside.

•After steaks, chops, or hamburgers have been allowed to sear for

approximately 1 minute, you may slide a spatula under the meat and
turn it approximately 90° so that a waffle pattern will be seared onto
the food.

•Use a metal spatula instead of tongs or a fork to turn the meat. A

spatula will not puncture the meat allowing juices to escape.

•Turn the meat over only once. Juices are lost when steaks, chops or

hamburgers are turned several times. The best time to turn the meat
is after the juices have begun to bubble to the surface.

•To test for doneness, make a small slash in the center of the meat, not

the edge. This will prevent loss of juices.

•Occasionally there may be flare-ups or flames above the grill due to

drops of fat falling onto the flame spreader. It is normal to have some
flare-up during grilling. Use a long handled spatula to move food to
another area until the flames subside.

Griddle Cooking Chart

Food

°F

°C

Eggs

250-300

121-149

Bacon

325-300

163-177

Pancakes

375-400

191-177

French Toast

400

205

Fish Fillets

300

149

Hamburger

350

177

Steaks

350

177

12

Griddle/Simmer Plate, Bake Burner, Infrared Burner

Turning the thermostat counter clockwise to any “on” position activates
a glo-bar igniter and opens an electromechanical valve in the system to
start the gas valve. The griddle has a power “ON” light which glows
when the griddle thermostat is turned on. the light cycles on and off
with the burner. It is not possible to use both the infrared burner and
the bake burners at the same time. The design of the system will not
permit this, both for control of bake/broiler and for safety of use.

Griddle/Simmer Plate Operation

•Turn the griddle control knob to desired temperature setting.
•Always turn off when not in use, or lower the heat between cooking

loads.

Cooking Tips
•Preheat griddle to the desired temperature. Wait until light cycles off

for indication that the desired temperature has been reached and the
griddle is preheated.

•Use liquid cooking oil, cooking sprays, or butter for eggs, pancakes,

French toast, fish and sandwiches. This will help to reduce sticking.
Meats usually have enough natural oils.

•Remove food particles with a metal spatula during cooking to make

the cleanup easier and to avoid including those particles in the food.

•Do not overheat the griddle. Turn off when not in use, or lower heat

between cooking loads.

•After using and cleaning the griddle, the surface should be wiped with

a light film of cooking oil to protect the finish from rust and corrosion.

Advertising