VocoPro UHF-6800 - Manual (Page 12)

11
Front panel controls and functions
1. Display LCD screens - Displays the Frequency/Channel number and UHF signal strength for each microphone
channel.
2. Arrow buttons - Use to navigate through the Frequency/Channel select menu on the receiver, when choosing a
frequency for each channel.
3. SET button - Use to make a selection when navigating through the Frequency/Channel select menu on the receiver.
4. Volume controls - Controls the volume for each mic channel. Turn clockwise to raise volume and counter-clockwise
to lower the volume.
5. Power button - Turns the UHF-6800’s receiver on and off. Press once to turn the receiver on and hold down for 3
seconds to turn the receiver off.
6. Antenna connectors - Connect antennas here. See the “Connecting the Antennas” section for instructions on
connecting the antennas.
1 2 3 4 5
6
Front Panel