VIEWSONIC PJ256D - Manual (Page 17)

13 ViewSonic PJ256D
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1. Press the elevator button
n .
2. Raise the image to the desired height angle
o
, then release
the button to lock the elevator foot into position.
3. Use p to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
foot into position.
3. Use
p
to fine-tune the display angle.
Elevator Foot
2
3
Elevator Button
1