Vivitar 690HD - Manual (Page 19)

18
Multi – Used in standard conditions the camera divides and adjusts the settings of the image into
several zones for light metering such as complex light conditions, position of subject, brightness,
background, direct light and scenes.
Spot
– Meters the area within the spot point frame at the center of the LCD to set the exposure on the
subject in the center of the monitor.
1) Press the MENU button to open the menus for the current mode.
2) Push the direction button LEFT or RIGHT to scroll and select the Metering menu.
3) Push the direction button UP or DOWN to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A selected option icon will appear on the selected item.
6) Push the direction button LEFT or RIGHT to select the next menu item.
7) Press the MENU button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be remembered by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Language Menu
You can select your camera‟s language setting by selecting the desired language from the Language
menu.
1) Press the MENU button to open the menus for the current mode.
2) Push the direction button LEFT or RIGHT to scroll and select the Language menu.
3) Push the direction button UP or DOWN to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A selected option icon will appear on the selected item.
6) Push the direction button LEFT or RIGHT to select the next menu item.
7) Press the MENU button to exit the menu and return to your previous mode.
8) Remember that this setting will be remembered by your camera until you manually change the
setting or restore the camera‟s default factory settings.