VIORE PLC10V49 - Manual (Page 24)

21
Trouble shooting
n o it c A m e l b o r P
The screen does not appear.
Is the power plug pulled out? Insert the power plug.
Press the power button.
The screen appears too This problem occurs for a brief time in the progression of image
elimination processing in order to hide temporary screen noise that
occurs when the power is turned on. If the screen does not appear
after one minute, contact your dealer or an authorized service center.
slowly after the power is turned on.
Screen is too bright or too dark. Perform brightness adjustment or contrast adjustment.
Screen is too large or too small. Adjust the screen size.
Stripes appear on the screen This problem can occur if wireless telephones, hair dryers, or electric
drills are used near the TV.
and it shakes.
Screen appears, Voice is not heard 1. Press the "MUTE"button.
2. Increase the sound level by pressing volume adjustment button.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. Select and check the other input.
If the sound still does not work and you have checked every channel
to ensure that the problem is not channel specific, contact your dealer
or an authorized service center.
Remote control does not work 1. Check if main power is On.
2. Check that the batteries of the remote controller were loaded
properly.
3. Check to see if any obstacle exists between the LCD TV and the
remote control.
4. If the batteries have no power, replace them with two new
batteries.
- Do not use other functions that are not mentioned in this user’s manual.
- In case a problem occurs with your LCD TV, please take the following steps first.
- If the problem still occurs, turn the power off and contact your dealer or an authorized service center.
This LCD TV is for household use and registered as harmless on electromagnetic waves. You can use
it in every location as well as residential areas.
Maintenance and service