Vista 29 - Manual

STROLLER SYSTEM
CAR SEAT ADAPTER
GRACO SNUGRIDE®
OR SAFESEAT TM (FITS BOTH)
General Safety Information
• Read all instructions before using this
product.
• Periodically check attachment by lifting up
on adapter or car seat.
• Designed to fit all Graco Snugride® or
SafeSeat TM infant car seats manufactured
from the year 2002 until the date of this
purchase.
• Maximum weight: Graco Snugride = 22
lbs, Graco SafeSeat = 30 lbs
Limited Warranty
Your UPPAbaby product is warranted to be free from any manufacturing defects for a period of 1 year from the date of purchase under nor-
mal use and in compliance with the operating instructions. This warranty extends only to the original retail purchaser and is only valid when
supplied with proof of purchase. Please retain proof of purchase with this Limited Warranty.
Please contact us at 800 760-2060 or [email protected] if you have any questions regarding warranty.
Please note that a problem will not be covered by this warranty if the problem is caused by misuse or poor maintenance.
WARNING
• To prevent serious injury or death, install and use
according to these instructions.
• Recommended only for infants within the height and
weight limitations of Graco Snugride® or SafeSeat TM
infant car seats.
• Intended for use with UPPAbaby VISTA stroller only.
• Always use infant car seat restraint system as recom-
mended by manufacturer.
• Never leave child unattended.
Model 0029
To attach the adapter
1) Frame without seat or bassinet (figure 1).
2) Position the adapter with the 3 plastic parts
away from the handle bars (figure 2). Snap in
adapter firmly. Lock indicators on frame will
appear green when fully inserted.
To attach the car seat
3) Snap in car seat firmly with seat facing the
handle bars (figure 3).
4) Make sure that rear lock tab is engaged
(figure 4). Lift up on car seat handle
to check attachment.
To remove the car seat
5) Lift lever on back of seat while lifting car seat
handle (figure 5).