Connecting to hdtv, Viewsonic 8 3dv5 – VIEWSONIC VS13782 User Manual
Page 13
ViewSonic
8
3DV5
1
Turn on your HDTV.
2
Connect the HDMI-in connector (the larger end) of the HDMI cable to the HDTV.
3
Connect the other end of the HDMI cable to your camcorder.
4
Turn on the camcorder.
5
On your HDTV, select the HDMI input port where the HDMI cable is connected.
6
Switch your camcorder to Playback mode and start to play a file. For operation
details please refer to the “Playback” section.
If your HDTV is 2D type, the 3D files output on your HDTV will be 2D “side-by-side” only.
If you want to experience 3D effect on your 2D HDTV, you need to convert the 3D files
into red/cyan format files by installing and using the bundled software (TotalMedia HD
Cam) and copy the converted files into the “DCIM\101DIR2D” folder in the memory card.
Then output the playback to your HDTV and wear the red/cyan glasses to watch it. For
more information please refer to the “Software Addendum” included in the package.
Connecting to HDTV
HDMI
port
1
2
4
3