Vertex Standard FT-2800M - Manual (Page 53)

51 FT-2800M O
PERATING
M
ANUAL
09 DT DLY
Function: Setting of the DTMF Autodialer’s TX Delay Time.
Available Values: 50/250/450/750/1000 (ms)
Default: 450 (ms)
10 DT MEM
Function: Loading of the DTMF Autodialer Memories. See page 28 for details.
11 DT SPD
Function: Setting of the DTMF Autodialer Sending Speed.
Available Values: 50/100 (ms)
Default: 50 (ms)
12 EDG BP
Function: Enables/disable the Band-edge beeper while scanning.
Available Values: ON/OFF
Default: ON
13 INTNET
Function: Selects the Internet Connection mode.
Available Values: WIRES/LINK
Default: WIRES
14 LOCK
Function: Selects the Control Locking Lockout combination.
Available Values: KEY/DIAL/K+D/PTT/K+P/D+P/ALL/OFF
Default: OFF
KEY: Just the front panel keys are locked out
DIAL: Just the front panel DIAL knob is locked out
K+D: Both the keys and DIAL knob are locked out
PTT: The PTT switch is locked (TX not possible)
K+P: Both keys and PTT switch are locked out
D+P: Both DIAL knob and PTT switch are locked out
ALL: All of the above are locked out
OFF: The Lock feature is disabled
“S
ET
” (M
ENU
) M
ODE
M
ENU
S
ELECTION
D
ETAILS