Vivitar DVR 518 - Manual (Page 32)

31
Auto / Daylight / Cloudy / Fluorescent / Incandescent.
4. The White Balance choice selected automatically appears on the LCD.
5. Press the OK button to confirm, save your choice and exit to the Setting
menu.
6. Press the MENU button to revert back to the Camera capture mode to start
taking photos with the new white balance selected.
Note:
After selecting your White Balance choice, the corresponding icon will appear
on the top of the LCD.
Exposure
This setting allows you to manually compensate for unusual lighting conditions
such as indirect indoor lighting, dark backgrounds, and strong backlighting. The
exposure value range is
–2.0 (Dark) to 2.0 (Bright) in increments of 0.3.
1. Press the Up/Down button to select the Exposure menu.
2. Press the OK button to open the Exposure submenu.
3. Press the Left/Right buttons to select the exposure setting as per the present
light condition:
EV-2.0 / EV-1.7 / EV-1.3 / EV-1.0 / EV-0.7 / EV-0.3 / EV+0.0 / EV+0.3 /
EV+0.7/ EV+1.0 / EV+1.3 / EV+1.7/ EV+2.0