Villaware 5785 User Manual
Page 3
~ Always assemble with rubber seal in place
~ To remove blade assembly from container, turn CLOCKWISE.
~ To attach blade assembly to container turn COUNTER-CLOCKWISE.
U S I N G Y O U R S M O O T H E E - B A R ™ B L E N D E R
BEFORE FIRST USE: Wash all parts, except motor base, in warm, soapy water. Never
immerse motor base in water, as this will damage the motor.
S E V E N S I M P L E S T E P S T O S U M P T U O U S S M O O T H E E S !
1. Add liquids first
2. Add fruits & soft foods next
3. If adding any ice, add last and add sparingly.
4. Start on LO setting, about 30 seconds.
5. Move Smoothee-Stick from side to side as needed to keep ingredients moving
6. Move to HI setting, until smooth.
7. Serve the Smoothee
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
5
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
A S S E M B L I N G Y O U R S M O O T H E E - B A R ™ B L E N D E R
1. Place the motor base on a flat, level surface. Never place container onto base while motor
is running.
2. To mount the smoothee-container, line up the faucet to the arrow marking on the motor
base that says “Align Here”.
3. Then turn the smoothee-container clockwise. There is an arrow marking on the motor
base to indicate this clockwise direction.
4. Turn until smoothee-container stops, and will not turn further. Now the faucet should be
pointing forward.
5. Plug the blender into a 120 volt 60 Hz AC only outlet.
6. The container lid must always be in place whenever motor is running.
7. The smoothee-stick may be removed to add additional ingredients while blending. Note: If
you are not using the smoothee-stick, there is a separate small cap cover that fits over the
hole in the lid.
Your blender is now ready for use.
G E T T I N G FA M I L I A R W I T H Y O U R
S M O O T H E E - B A R ™ B L E N D E R
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
4
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
C
A
Smoothee-Stick
Lid
Lid Cap
Smoothee-Container
Smoothee-Spout
Off-Lo-Hi Buttons
Pulse Button
Motor Base
(Never immerse in water)
Drip Tray
Smoothee-Container
Blade Assembly Rubber Gasket
Blade Assembly
Container Handle
5785_Booklet.qxd 1/8/04 1:37 PM Page 4