Adding special program features (optional) – VIEWSONIC MC204 User Manual
Page 5
Installing the mouse using a PS/2 Adapter Connection
1
Turn off your PC.
2
Plug the mouse with a PS/2 Adapter Connection into the PS/2 port on your
computer.
3
Turn on your PC and monitor. Installation is now complete with standard
mouse features.
Adding Special Program Features
(optional)
To add special program features to your ViewSonic Optical Mouse MC20
4,
install the mouse driver as follows:
1
Insert the disk that came with your ViewSonic Optical Mouse into your
computer’s disk drive.
2
Follow the instructions on the screen to finish the software installation
To Unstall the mouse driver: click Start>Program>ViewMate Optical Mouse
>Unstall ViewSonic Optical Mouse MC204>Next>Finish.
PS/2 Adapter (green)
USB connection
Mouse
ViewSonic ViewMate
Optical Mouse M
C204
4
E
N
G
L
I
S
T M
E
N
G
L
I
S
H
T M