VIEWSONIC VX900 - Manual (Page 9)

Do the following to adjust the screen image:
1 To display the Main Menu, press button [1].
NOTE: All OnView menus and adjustment screens disappear automatically
after about 30 seconds.
2 To select a control you want to adjust, press ▲ or ▼ to scroll up or down the
Main Menu.
3 After the control is selected, press button [2]. A control screen like the one
shown below appears.
4 To adjust the control, press the up ▲ or down ▼ buttons.
5 To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60 Hz to the LCD display. (Look for instructions on “changing
the refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display.)
The
▼
down
arrow decreases,
▲ up arrow
increases
The line at the
bottom of the
screen tells you
what you can do
next: Exit or select
the Brightness
control.
ViewSonic VX900 8