Vestax CDX-35P - Manual (Page 9)

8
PLAY/PAUSE KEY
Each press of the PLAY/PAUSE button cause the
operation to change from play to pause or from pause
to play.
CUE KEY
Pressing cue button returns the CD to the last set
"CUE" point and pauses it. The CUE point is either
the position at which "PLAY" was last actually
started or the "LOOP IN" point it was previously set.
Pressing the "CUE" button a second time allows the
music to be played from the "CUE" position until it is
released.
Repeatedly pressing the cue button allows the CD to
be played from the same position any number of
times. The CUE LED will light up from the time the
CUE button is pressed until the CD has reset to the
position at which play was started. Steady lighting of
this LED indicates the ready condition.
MONITOR KEY
When the monitor button is pressed during the
PAUSE mode ,a short loop sound of the paused
position is played back for monitoring. Then exact
position for the next start can be searched and set by
using the SEARCH DIAL.
POINT FOCUS KEY
Used for changing time of monitor sound.
CUE MEMORY
Press the cue memory button. The CUE BANK
indicater lights. You can select any cue bank. Press
BANK button (1,2,3).The controller memorizes cue
point.
CUE MEMO 1,2,3 KEY
Used for setting and recall cuepoint.
NEXT KEY
Used for skipping forward to the starting point of the
next track. The number of tracks skipped ahead.
PREVIOUS KEY
Used for skipping backwards to the starting point of
the current track(one press). Pressing twice returns to
the starting point of the previous track. Pressing
additional times will return to the corresponding
previous track.
SEARCH DIAL
This search dial serves two functions depending on
the mode you are working in.
a, The search dial will act as a slow flame search
control when the CD is not playing but either
paused or set to a cue point.To set a new flame cue
point, spin the dial then press play when you have
determined the proper position. Press CUE to
return the 'CUE POINT'.
b, The search dial will temporarily bend the pitch of
the music up to +/- 10% if the song is already
playing by rotating the dial clockwise to speed up
or counterclockwise to slow down. The amount of
pitch change is determined by the speed of
rotation.
PITCH CONTROLLER
The pitch can be changed up to +/- 10% by moving
sliding fader.
KEY CONTROL
The key can be change up to +/- 1 octave by rotating
volume.
MASTER TEMPO
Press the MASTER TEMPO button. The MASTER
TEMPO indicater lights. You can change the playing
speed by moving PITCH CONTOROLLER.
Even when the music's speed changes, the music
pitch does not change.