VuPoint Solutions VuPoint DV-DA1-VP - Manual (Page 33)

26
up or down to select a frame from the 16 picture frames.
5. Press in the joystick to confirm and exit the menu.
3.4.2.8 EV adjust
Use this option to change the exposure for your photo. Usually this
value would be set to 0.0, but you might want to increase the
exposure to light up a subject with black lighting, or decrease the
exposure if taking a video in a very bright area.
To adjust the EV adjust:
1. Press the joystick up or
down to highlight the EV
adjust option.
2. Press the joystick left or
right to select from –2.0 ~
0.0 ~ +2.0.
3. Press in the joystick to confirm, and press the Menu
button to exit the menu.
3.4.2.9 ISO
ISO (Sensitivity) settings control the camera's sensitivity to light.
The lower the sensitivity, higher exposure value is needed. When
you increase the sensitivity, the shutter speed will be faster and
exposure value will be reduced. There might be noises on the
images.
To set the ISO:
1. Press the joystick up or down to highlight the ISO option.
2. Press the joystick left or
right to select from Auto, 50,
100 or 200. (100 is
equivalent to the ISO 100
film, and so on.)
3. Press in the joystick to
confirm and press Menu