Vinotemp VT-34 TS - Manual (Page 8)

8
8 W W W . V I N O T E M P . C O M
OPERATING INSTRUCTIONS
1) Gently place/slide the racks into the wine cellar.
2)
Determine the best temperature setting to use.
3) Place bottles inside the cooler.
4) Plug the power cord into a standard grounded electrical outlet.
5) Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
6) You can turn the interior light on and off by touching the button
labeled with a light on the control panel.
Important: When using the wine cellar for the first time, allow at least
24 hours for the internal temperature to adjust properly. Make sure there
are at least 3 to 5 bottles in the unit.
TEMPERATURE CONTROL
Your wine cooler has a touchscreen control panel located on the upper
part of the glass door.
Setting the temperature:
You can manually adjust the temperature. Simply press the down arrow
button on the control panel to decrease the temperature and the up arrow
button to increase the temperature by 1 degree increments inside the
wine cellar. The temperature range for this unit is from 39°F (4°C) to
65°F (18°C).
To switch the temperate display from showing Celsius and Fahrenheit,
press the C/F button.
Control Panel Lock:
• Your wine cooler is equipped with an automatic control panel lock
function. This feature will prevent any unwanted changes to your
temperature or power settings.
• The lock function will activate automatically 12 seconds after the last
time a button is pushed on the control panel.