Venturer PLV16070 - Manual (Page 5)

- 4 -
QuicK Start GuiDe
turninG on the unit for the firSt tiMe
The first time you turn on the unit, the unit will enter the setup mode. you can easily follow the prompt
message on the screen to complete basic TV settings.
Make sure the TV antenna has been connected properly to the antenna rf in terminal
on the side of the TV.
1. Press the / button to select your preferred
On-screen menu language. Use the /
button to highlight “Go to next step:“ and
press the enter button to enter next setup
screen.
2. Use the / button to switch between
different items, then press the / button
to select the desired options. Use the /
button to move the highlight bar on “Go to
next step:“ and press the enter button to
enter next setup screen.
3. Use the / button to select Air/Cable, then
press the / button to select Air or Cable.
Highlight “Go to next step:“ and press the
enter button to start scanning channels.
4. After scanning finishes, the system will return to the first TV channel scanned.
Setup Wizard
Please select your prefer language :
Menu Language English
Go to next step :
MENU ENTER
Setup Wizard
Time Zone Pacific
DST Off
Time Format 24-hour
Go to next step :
Select the time zone & Daylight saving time:
MENU ENTER
Setup Wizard
Select the antenna type then auto scan:
Air / Cable Air
MENU ENTER
Cable System AUTO
Go to next step :