Verizon CDM8615 - Manual (Page 31)

SETTINGS SETTINGS
C
H
4
59
C
H
4
58
Controls the Ringer, Key tone, Voice Call and Speaker Phone volume.
VOLUME
RINGER
1 Press [MENU] .
2 Select one of the following options by
pressing the Navigation Key to the right.
3 To confirm, press [OK].
1 Press [MENU] .
Silent : Mute the ringer, press (Min).
Ringer Off
Vibrate On
Ringer Mode : Up & Down (Level 1~5)
High & Vib : The ringer sounds after vibration,
press (Max).
To adjust key pad tone:
Controls the Ringer volume and alerts you to incoming calls in the
modes listed in the gray box below.
KEY TONE
2 Adjust the key pad tone with the Navigation Key.
3 To save, press [OK].
1 Press [MENU] .
To adjust earpiece volume:
VOICE CALL
2 Adjust the earpiece volume with the Navigation Key.
3 To save, press [OK].
Level 1 - 5 (Min- , Max- )
Off (Min- )
Level 1 - 5 (level 5, Max- )
When selected, this setting alerts you to the following handset changes:
Sounds an alert every minute during a call.
ALERT
MINUTE
2 Select “Off” or “On” with the Navigation Key then
press [OK] to save it.
1 Press [MENU] .
Sounds an alert when leaving a service area and entering a roaming
service area.
ROAM
2 Select “Off” or “On” with the Navigation Key then
press [OK] to save it.
1 Press [MENU] .
Notifies you that a call has been successfully placed.
CONNECT
2 Select “Off” or “On” with the Navigation Key then
press [OK] to save it.
1 Press [MENU] .
1 Press [MENU] .
To adjust speaker phone volume:
SPEAKER PHONE
2 Adjust the speaker phone volume using the
Navigation Key.
3 To save, press [OK].
Level 1 - 5 (Min- , Max- )