Vizio VSB205 - Manual (Page 13)

high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
• Keep your Sound Bar away from moisture. Do not expose
your Sound Bar to rain or moisture. If water penetrates into
your Sound Bar, unplug the power cord and contact your
dealer. Continuous use in this case may result in fire or
electric shock.
• Do not use your Sound Bar if any abnormality occurs. If
any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your
Sound Bar yourself.
• Avoid using dropped or damaged appliances. If your Sound
Bar is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use
of your Sound Bar may cause fire or electric shock.
• Do not install your Sound Bar in an area with heavy dust
or high humidity. Operating your Sound Bar in environments
with heavy dust or high humidity may cause fire or electric
shock.
• Ensure that the power cord and any other cables are
unplugged before moving your Sound Bar.
• When unplugging your Sound Bar, hold the power plug, not
the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your
Sound Bar will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector
with wet hands.
• Insert the remote control battery in accordance with
instructions. Incorrect polarity may cause the battery to leak
which can damage the remote control or injure the operator.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays
- Liquid sprays or any object drops into your Sound Bar
- Sound Bar is exposed to rain or other moisture
- Sound Bar is dropped or damaged in any way
- The performance of your Sound Bar changes
substantially
SPECIFICATIONS
Sound Bar: Four 2.75” High-Efficiency
Hand-Built Full Range Transducers
Inputs: 1 x 3.5mm Audio
1 x RCA Stereo Audio
Sound Pressure
Level:
98 dB
Frequency
Response:
90Hz - 19 KHz
Voltage: 100-240 VAC, 50-60 Hz
Dimensions: 31.50” x 3.98” x 2.75” (with stand)
31.50” x 3.20” x 2.75” (w/o stand)
Net Weight: 4.76 lbs (with stand)
4.10 lbs (w/o stand)
Gross Weight: 6.98 lbs
Compliances: UL, FCC
11