Vinotemp V T - I C E M P 2 5 - Manual (Page 4)

BEFORE USING
• Before connecting the appliance to a power supply, let unit stand upright
overnight. This will reduce the possibility of the cooling system
malfunctioning due to improper handling during shipping.
• Clean your unit thoroughly before putting into use.
• Use the parts diagram on page 5 to insure proper positioning of internal
components.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire,
electrical shock or injury when
using your appliance, follow
these basic precautions:
• Do not operate this or any other appliance with a damaged cord.
• Connect to properly polarized outlets only. No other appliance should be
plugged into the same outlet. Be sure that the plug is fully inserted into
the receptacle.
• Do not run cord over carpeting or other heat insulators; do not cover
cord. Keep cord away from traffic areas and do not submerge in water.
• We do not recommend the use of an extension cord, as it may overheat
and become a fire risk. However, if you still elect to use an extension
cord, it is absolutely necessary that it be a UL Listed 3-wire grounding
type appliance extension cord having a 3-prong grounding plug and a 3-
slot receptacle that will plug into the appliance. The marked rating of the
extension cord should be 115 V, 15 A
• Unplug the ice maker before cleaning it or making repairs.
• Exercise caution and use reasonable supervision when appliance is used
near children.
• Do not clean your ice maker with flammable fluids. The fumes can
create a fire hazard or explosion.
• Do not tip over.
• Do not operate with side or back panels removed.
• If the ice maker is brought in from outside in wintertime, give it a few
hours to warm up to room temperature before plugging it in.
• Ice maker is intended for household use.
• For use in a controlled ambient location such that the ambient
temperature does not exceed 90°F (32°C) and is not below 60°F (16°C).
4
W W W . V I N O T E M P . C O M