Replacement parts, Specifications – Vector 022APC User Manual

Page 13

Advertising
background image

13

7.

REPLACEMENT PARTS

For replacement parts (bulbs, batteries, fuses, etc.), contact Vector Customer Service:

(954) 584-4446 or toll-free (866) 584-5504.

7.1

CCFL

CCFL lamp is designed for 100,000 hours of operation.

It is not user replaceable.

7.2

BATTERY REPLACEMENT

It is recommended that the unit be returned to Vector Customer Service

for battery replacement: Contact (954) 584-4446 or toll-free

(866) 584-5504.

WARNING:

• Do not dispose of the battery in fire as this may result in an explosion

• Before disposing of the battery, protect exposed terminals with heavy-duty electrical

tape to prevent shorting (shorting can result in injury or fire)

• Do not expose battery to fire or intense heat as it may explode

7.3

BATTERY DISPOSAL:

This unit contains a maintenance-free, non-spillable, sealed lead-acid

battery. This battery is fully recyclable and should be accepted at any

location that accepts common automotive starter batteries. Examples of

places that accept these batteries are: County or municipal recycling

drop-off centers, scrap metal dealers and retailers who sell automotive

replacement lead acid starter batteries. For more information on

recycling this battery, call toll-free (877) 288-7722.

8.

SPECIFICATIONS

Model ................................................................................. VEC022APC

Boost Ampere ..................................... 450 Instantaneous Cranking Amps

Peak Ampere ....................................................................... 1200 Amps

Continuous Cranking .............................................................. 250 Amps

Battery Type ....................... Sealed, high energy density, AGM, lead-acid,

..............

rechargeable, maintenance-free, 12 volt DC, 19 Amp-hour

Area Light ................................... Cold Cathode Fluorescent Lamp (CCFL)

Booster Cables ......................................... Heavy duty welding cable with

.................................................................

450 Amp copper clamps

Accessory Socket ..................................... Self-Resetting Breaker 20 Amps

Air Compressor .......................................................................... 260 PSI

DC Charging Adapter ............................................................ 12 Volt DC

AC Charging Adapter ...... 110/120 Volt AC (700mA, 12 Volt DC Output)

Reverse Polarity Detection .................................................... 2 Volts (min)

HEIGHT ................................................................... 11.75 in. (29.8 cm)

DEPTH ............................................................................8.25 in (21 cm)

WIDTH ................................................................... 11.625 in (29.5 cm)

WEIGHT ..................................................................... 19.1 lb. (8.66 Kg)

Manual 022APC

12/20/02, 8:40 PM

13

Advertising
This manual is related to the following products: